Aervoe’s solvent-based marking paint is a superior upside down marking paint that is designed to clearly and effectively mark the location of underground utilities, planned construction, and survey marking. Colors formulated to meet standards set by OSHA and APWA/One Call Systems. 

• Available in 12 regular and fluorescent colors 

• Mark is visible for 3 to 6 months depending on traffic and exposure 

• Non-clogging can empties contents completely 

• Patented spray-through cap can be left on or easily removed 

• Designed to be used in Aervoe’s #244 Spot Marker, #245 Marking Stick, or by hand 

• This product is not recommended for use on turf surfaces

Colors:

AER261S Red

AER263S Blue

AER264S Green

AER265S Orange

AER 266S Black

AER272S Fluorescent Orange

AER262S Yellow

AER267S White

AER275S Fluorescent Red-Orange

AER244 & AER245

• Sturdy, lightweight construction

• Single-hand operation

• Contoured handle for easy, comfortable grip

• Convenient trigger actuator

• Can may be placed in applicator with cap on

• Approximate length 32"

Zinc Rich and Brite Galv provide superior corrosion-resistant coatings that act as both primer and top coat for iron, steel, and their welds. Both coatings repair hot-dip galvanizing that has been damaged by abrasion, scratching, cutting or welding.

Features of Zinc Rich

• Contains 97% pure zinc metallic flake with 93% zinc in the dry film

• Fast drying, exceptionally smooth flowing high solids formulation

• Meets performance requirements of MIL-P-46105, and DOD-P-21035A

• Meets ASTM B-117-64 salt spray; withstands up to 2000 hours of salt spray exposure

• Passed Preece test for hot-dip galvanizing

• Provides superior protection to ferrous metals that are exposed to highly corrosive environments

• Performs at temperatures up to 400° F

• Stops rust and corrosion on any steel or iron surface

• Outstanding weld through primer

• Can be used as primer or top coat

• Zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing

• Acceptable as a coating in federally inspected meat and poultry plants for application to structural surfaces or any surface where there is a possibility of incidental food contact

Features of Brite Galv

• Restores galvanized surfaces to the bright look of hot-dip

• Performs at temperatures up to 400° F

• Dries to a bright, shiny silver finish to provide protection and repair similar to hot dip

• Stops rust and corrosion on any steel or iron surface

• Outstanding weld through primer

• Can be used as primer or top coat

• Zinc fuses to metal substrates for protection equal to or better than hot-dipped galvanizing

• If surface is scratched or broken an electrochemical reaction called sacrificial anodization causes the zinc to sacrifice itself for the base metal’s protection

• Meets performance requirements of ASTM A780-93A

• 65% pure zinc in dry film

• Acceptable as a coating in federally inspected meat and poultry plants for application to structural surfaces or any surface where there is a possibility of incidental food contact

• Dries to touch in just 10 minutes