A runway closure signal that efficiently warns pilots of closed airport runways and taxiways, and protects maintenance crews working in these areas. The adjustable brightness allows this system to give a warning that is visible 10-25 miles away.

Features:

• Easily set up by one person in 2-3 minutes, withouttools
• 3 year/3000 hour engine warranty
• Four folding arms open to 14 foot length
• 20 PAR lamps deliver over 170,000 candelas at beamcenter
• Visible 10-25 miles from runway under VFR
• Selectable brightness levels to suit environmentalconditions
• Photocell dimming for night operation
• Four rear-mounted lamps allow visual monitoringfrom rear side
• Powered by a three-cylinder, liquid cooled Mitsubishidiesel engine and Marathon brushless generator
• Operates 140 hours between fuel fills
• Highway towable, with a standard 2” hitch coupler
• 2200 pound, DOT compliant trailer
• 4 swivel leveling jacks
• Adjustable light beam angle
• Optional rear hitch, allows tandem towing of 2 units

Compliance with Standards:

ETL Certified to FAA AC 150/5345-55 latest revisionwith FAA AC 150/5370-2 and NTSB Safety Recommendation A-03-05

Light Assembly Specifications:

• Arm length 14 feet when operating
• Hinged to generator housing, swings upright for use,swings to horizontal position when stowed
• Assembly arms fold to a 5’x5’ square for transportand storage
• Arms constructed of 4”x4” extruded aluminum, withyellow epoxy powder-coat paint.
• Twenty halogen lamps mounted in front,plus 4 monitor lamps in rear, 24 total
• PAR 38 halogen lamp, 25 degree beamwidth, ratedlife 4200 hours
• Lamps flash 2.5 seconds on, 2.5 seconds off
• Solid-state flasher, no mechanical contacts
• Photocell automatically reduces intensity at night
• 2-year warranty on light assembly, excluding lamps

Trailer Specifications:

• 2200 pound axle
• 2” ball or optional pintle hitch, safety chains
• Four 2000 lb. leveling jacks. Side jacks are onextendable 38” outriggers
• DOT-compliant tail and marker lights
• Tires - ST175/80 D13, highway-rated
• All steel tubing construction
• Width: 67 inches
• Length: 105 inches
• Height: 64 inches
• Total wet weight 1600 lbs.

Engine and Generator Specifications:

• Engine: Mitsubishi L3E Diesel, 12.7 hp, 3-cylinder,liquid-cooled, 4-stroke, 1800 RPM, electric start
• Engine Warranty:2 years/2000 hours on entireengine, 3 years/3000 hours on major components
• Glow plugs and elapsed hour meter
• Low oil/high temperature auto-shutdown
• Generator: Marathon Electric, 6.0 kW, 120 VAC,4-pole, brushless
• Fuel tank capacity 57 gal., consumption 0.4 gph,140 hour runtime